|
|
|
|
|
|
Rinehart Original Exhaust Sytem for Softails
|
|
Product price is not filled in. This product cannot be purchased.
|
|
|
Rinehart Original Exhaust Systems for Softail Models
- Gerald Rinehart developed these exhaust systems for the motorcycle industry
- Dyno tested at Tilley Harley Davidson; Don Tilley himself will attest to the unequaled performance of this exhaust against other top performance exhaust systems
- Feature a unique header design utilizing multi-bend radius technology
- Systems with O2 sensor ports accept OEM or aftermarket closed-loop fuel management systems
- The three-step header pipes start at 1 3/4” at the head, increase to 1 7/8” and finish at 2”
- Header pipes feature permanently mounted 2 1/2”-dia. full-length heat shields
- Stepped header pipe and special removable performance baffle design combine to offer the most unique sound available, as ground shaking as the heritage it was derived from
- Systems are highlighted by the polished black anodized billet aluminum end caps engraved with the Rinehart logo
- Optional chrome end caps are available separately
- Designed and built in the U.S.A.
>
|
|
|
|
|
|
|
|
|
|
Rinehart Exhaust Systems
|
|
Product price is not filled in. This product cannot be purchased.
|
|
|
Rinehart Original Exhaust Systems
Gerald Rinehart developed these exhaust systems for the motorcycle industry
Dyno tested at Tilley Harley Davidson; Don Tilley himself will attest to the unequaled performance of this exhaust against other top performance exhaust systems
Feature a unique header design utilizing multi-bend radius technology
Dual oxygen sensor ports accept OEM or aftermarket closed-loop fuel management systems
The three-step header pipes start at 1 3/4” at the head, increase to 1 7/8” and finish at 2”
Header pipes feature permanently mounted 2 1/2”-dia. full-length heat shields
Stepped header pipe and special removable performance baffle design combine to offer the most unique sound available, as ground-shaking as the heritage it was derived from
Systems are highlighted by the polished black anodized billet aluminum end caps engraved with the Rinehart logo
Optional chrome end caps are available separately
Designed and built in the U.S.A
|
|
|
|
|
|
|
|
|
|
Rinehart Original Exhaust Sytem for Sportsters
|
|
Product price is not filled in. This product cannot be purchased.
|
|
|
Rinehart Original Exhaust System for Sportster Models
- Gerald Rinehart developed these exhaust systems for the motorcycle industry
- Dyno tested at Tilley Harley Davidson; Don Tilley himself will attest to the unequaled performance of this exhaust against other top performance exhaust systems
- Feature a unique header design utilizing multi-bend radius technology
- Systems with O2 sensor ports accept OEM or aftermarket closed-loop fuel management systems
- The three-step header pipes start at 1 3/4” at the head, increase to 1 7/8” and finish at 2”
- Header pipes feature permanently mounted 2 1/2”-dia. full-length heat shields
- Stepped header pipe and special removable performance baffle design combine to offer the most unique sound available, as ground shaking as the heritage it was derived from
- Systems are highlighted by the polished black anodized billet aluminum end caps engraved with the Rinehart logo
- Optional chrome end caps are available separately
- Designed and built in the U.S.A.
|
|
|
|
|
|
|
|
|
|
Rinehart Original Exhaust Sytem for V-Rods
|
|
Product price is not filled in. This product cannot be purchased.
|
|
|
Rinehart Original Exhaust System for Vrod Models
- Gerald Rinehart developed these exhaust systems for the motorcycle industry
- Dyno tested at Tilley Harley Davidson; Don Tilley himself will attest to the unequaled performance of this exhaust against other top performance exhaust systems
- Feature a unique header design utilizing multi-bend radius technology
- Systems with O2 sensor ports accept OEM or aftermarket closed-loop fuel management systems
- The three-step header pipes start at 1 3/4” at the head, increase to 1 7/8” and finish at 2”
- Header pipes feature permanently mounted 2 1/2”-dia. full-length heat shields
- Stepped header pipe and special removable performance baffle design combine to offer the most unique sound available, as ground shaking as the heritage it was derived from
- Systems are highlighted by the polished black anodized billet aluminum end caps engraved with the Rinehart logo
- Optional chrome end caps are available separately
- Designed and built in the U.S.A.
|
|
|
|
|
|
|
|
|
|
Rinehart Original Slip-ons
|
|
Product price is not filled in. This product cannot be purchased.
|
|
|
Rinehart Original Slip-On Mufflers
- Slip-on mufflers create huge performance gains (more than a complete system in some cases) at a lower cost
- Unique muffler utilizes a venturi chamber baffle design for optimum performance throughout the rpm range
- High luster chrome finish with a newly designed Rinehart insignia engraved over a black-anodized aluminum end cap
- ”Eagle Beak” mufflers for Dressers and Softail models feature unique billet-aluminum engraved signature ring and laser-cut “Eagle Beak” end caps
- All mufflers work with stock headers and heat shields
- Fast, easy installation; mounting hardware included
- Sold in pairs
- Designed and built in the U.S.A.
|
|
|
|
|
|
|
|
|
|
Rinehart "Eagle Beak" slip-ons
|
|
Product price is not filled in. This product cannot be purchased.
|
|
|
Rinehart "Eagle Beak" Slip-On Mufflers
- Slip-on mufflers create huge performance gains (more than a complete system in some cases) at a lower cost
- Unique muffler utilizes a venturi chamber baffle design for optimum performance throughout the rpm range
- High luster chrome finish with a newly designed Rinehart insignia engraved over a black-anodized aluminum end cap ”Eagle Beak” mufflers for Dressers and Softail models feature unique billet-aluminum engraved signature ring and laser-cut “Eagle Beak” end caps
- All mufflers work with stock headers and heat shields
- Fast, easy installation; mounting hardware included
- Sold in pairs Designed and built in the U.S.A.
|
|
|
|
|
|
|
|
|
|
Rinehart True Duals for Touring
|
|
Product price is not filled in. This product cannot be purchased.
|
|
|
Rinehart True Dual Exhaust System for Touring Models
- New formed muffler canister for a stronger, cleaner look
- Same unique header design as the Softail and Dyna styles to provide the largest power and torque increase of any exhaust system available
- Systems with O2 sensor ports accept OEM or aftermarket closed-loop fuel management systems
- Header features multi-bend radius technology and a three-step size increase: 1 3/4” at the head, to 1 7/8” mid and then a 2” finish
- The header pipes include 2 1/4” dia. full-length heat shields
- Redesigned mounting bracket kit holds the rear pipe in the center for added support and less stress
- New design torque-chamber baffles produce a deep, rich sound with less objectional noise; only 96 dB at half-throttle (2500 rpm)
- Optional baffles available separately
- This chromed system is highlighted by polished black anodized billet aluminum end caps engraved with the Rinehart logo
- Replacement black and optional chrome end caps available separately
- Designed and built in the U.S.A.
|
|
|
|
|
|
|
|
|
|
Rinehart 2-into-1 System
|
|
|
Rinehart 2-into-1 Exhaust System
- 2-into-1 systems use high-flow, mitered-cut 1 7/8” headers with a machined inlet for added exhaust velocity and improved anti-reversion qualities
- Fat, full-coverage 2 1/4” heat shields with an additional heat shield that gives the header-muffler union a smooth, sleek look
- Oxygen sensor ports accept OEM or aftermarket closed-loop fuel management systems
- 4 1/2” megaphone-style muffler has a rich, deep tone
- Black-anodized billet aluminum end cap uses Multi-Angled Bell (MAB) technology that provides quicker throttle response and substantially improved torque and horsepower
- Available with chrome or new black ceramic finish
- Optional quiet baffle available separately
- Designed and built in the U.S.A.
|
|
|
|
|
|
|
|
|
|
RINEHART CROSS-BACK 2-INTO-2 EXHAUST SYSTEMS
|
|
|
RINEHART CROSS-BACK 2-INTO-2 EXHAUST SYSTEMS
- Crossed-up, seven-step header design with 2 1/2” integrated mufflers
- Significantly increase torque and horsepower across the range
- 2 1/2”, 220° full-coverage heat shields merge flush to muffler bodies; Rinehart Racing logo is laser-cut into the front heat shield
- Feature two O2 sensor ports Include two sets of baffles, 2” o.d. for engines up to 96 ci and 2 1/4” o.d. for larger and high-performance engines
- Finish with custom billet end caps Available with either chrome headers, heat shields and mufflers with black anodized end caps or black headers and mufflers with chrome heat shields and end caps
- Optional quiet baffles available separately
|
|
|
|
|
|
|
|
|
|
|
BANNER, DRAG & RINEHART 9904-0271
|
List Price: $15.95
Our Price: $12.67
You save $3.28!
|
|
|
BANNER, DRAG & RINEHART 9904-0271
|
|
|
|
